Steam Boiler Safety 101: 6 Protocols you Should Follow sadsad

Historically speaking, steam boilers haven’t had the best track record with safety, but just as the modern era has seen the development of better steam boilers, so too has their safety record improved and, most importantly, the safety protocols and knowledge surrounding their operation. That being said, incidents do still happen, and the consequences can range from minor burns to more extreme cases such as explosions or fires. Today’s article is going to cover the etiquette surrounding steam boiler safety, including steam boiler maintenance — the most crucial factor of all.

1.     Wear proper PPE

It never hurts to state the obvious when it comes to industrial devices; one of the most common incidents associated with industrial steam boilers is related to burns from making contact with the hot exterior.  Before working with or in the proximity of steam boilers you should ensure you’re equipped with the appropriate PPE (Personal Protection Equipment) to mitigate this from occurring. Proper PPE includes:

  • Safety glasses;
  • Gloves;
  • Long sleeve shirts;
  • Appropriate safety boots and trousers; and
  • Ear protection.

2.     Be aware of your surroundings

Falling is another commonly associated incident; the injuries can range from a minor scrape to more serious wounds. Rather than taking the chance, we recommend you implement a take five approach and never rush things when operating steam boilers or similar equipment. Be aware of your surroundings and ensure the encompassing area is kept clear of any unnecessary items on a daily basis. This is a good habit to get into and could circumvent the occurrence of incidents.

3.     Never operate unfamiliar devices

Given the nature of steam boilers, under no circumstances should they ever be operated by untrained or inexperienced hands. An operator should be familiar with every component of a boiler to ensure they are:

  1. in as much control as possible in the event of an incident; and
  2. can read the boiler and foresee, in-a-manner-of-speaking, when an issue may (component repairs, general maintenance etc.).

On-the-job training is not enough; formal sessions should be implemented to ensure the operator has a thorough understanding of the device — this includes simulated emergency drills to acclimatise the operator to thinking on their feet in case of a genuine emergency.

4.     Steam boiler maintenance

The most crucial action you can take to prevent incidents from occurring is following correct and regular steam boiler maintenance practices — this will mitigate the chance of components failing (which can, in some extreme cases, actually result in the boilers exploding).

It’s not just about repairing components when they begin to degrade, but ongoing preventative maintenance to ensure your boiler is in optimal working condition — this will result in a more efficient system overall. You can contact Tomlinson Energy Services 24/7 if you require steam boiler maintenance services.

5.      Leak management

This point ties back to our last two regarding steam boiler maintenance and being familiar with the boilers; there are four different types of serious leaks that any boiler operator should look out for, these include:

  • Steam;
  • High and low-pressure feedwater;
  • Gauge glasses; and
  • Safety valves.

In most cases, these types of leakages can lead to steam burns to operators or fires due to liquid spraying electrical equipment that does not have the appropriate IP rating. Leaking gauge glasses can actually explode and send glass flying as well as steam; in less serious instances a leaking gauge glass can indicate inaccurate water level measurements. It’s important to keep all boilers and components well-maintained and to never overextend their operational capacity.

6.     Handle treatment chemicals with care

Boiler water must be treated with certain chemicals such as potassium hydroxide to ensure it remains free of impurities; these chemicals can cause bodily harm to the operators if handled incorrectly. Always read the MSDS and ensure the appropriate safety precautions are being taken including wearing the proper PPE.

Australian steam boiler specialists

Tomlinson Energy Services prides itself on being Australia’s leading steam boiler and thermal energy systems vendor; specialising in complete solutions, we can assist you with all your steam boiler maintenance, sales and installation services. Our knowledgeable and experienced specialists can assist you with system selection to ensure the right product perfectly fits your operations.

If you would like to find out more about our services, then please do not hesitate to contact us by filling out the form below or calling the Tomlinson head office located in your state. 

The History of the Steam Engine: A Revolutionary Concept sadsad

Steam-driven machines have been around for hundreds of years and represent a tried-and-true concept that is still used today. As Australia’s leading boiler service specialists, we think it’s important for our customers to understand the origins of this revolutionary technology. From 1st century Greek civilisation to the Boulton-Watt engine — let’s take a look at the important history of steam engines.

1st century — The Aeolipile (Heron’s engine)

What is also known to be the world’s first steam engine, the Aeolipile was created during the 1st century by a Greek named Heron. The Aeolipile consisted of a sphere with two cylindrical exhausts angled in different directions; the sphere was connected and suspended above a kettle via two pipes — which would heat water and force steam to flow through the connecting pipes into the sphere.

The steam blowing out of the two exhausts would spin the sphere — displaying one of the first examples of reactive force. Heron’s engine did not serve any known practical uses but was simply an (at the time) impressive feat of engineering and the precursor to the boilers we know and use today.

17th century — flooded mines and the first practical applications

As coal mining became prominent in Europe, deeper mines were dug, resulting in water sources being found and flooding said mines. This is where the first practical use of a steam engine arose as Spanish inventor Jerónimo de Ayanz patented a machine that used steam to propel the water out of the mines in Guadalcanal, Seville. Later in the century, English inventor Thomas Savery patented a machine for the same purpose that also relied on steam; Savery’s model leveraged cylinders and pistons and, by 1705, his first working steam engine had been created.

Unfortunately, this iteration was not without its issues and it wasn’t long until another inventor, Thomas Newcomen, came along and remedied the flaws in Savery’s machine with a design that used atmospheric-level steam pressure (as opposed to requiring accumulated steam pressure). Newcomen’s design was used for a number of decades in the 18th century but was not very efficient, constantly requiring cold and hot water to cool and heat the steam cylinder.

18th century — the industrial revolution

James Watt is a name well known in the boiler industry as he is the Scottish inventor and mechanical engineer known for improving Newcomen’s steam engine; these changes are said to be a vital part of the industrial revolution. Watt formulated these advances in 1756 but was unable to implement them until 1776 after he met an English manufacturer, Matthew Boulton, who was committed to using steam engines for a variety of applications and had the financial backing that Watt required.

What is known as the Boulton-Watt engine utilised a double-acting (initially a single-acting) rotative engine with an independent condenser capable of maintaining a constant temperature (solving the continuous requirement for water in Newcomen’s machine). This engine was also twice as powerful due to a parallel motion mechanism, allowed operators to control its speed with a centrifugal governor device and leveraged a new gearing system that permitted linear motion to be converted into rotative motion. The Boulton-Watt engine was revolutionary and was used for all sorts of applications over the next few centuries including the powering of factories, mills and breweries.

20th century — water-tube boilers and becoming the modern machine

In 1766, the first water-tube boiler was built and patented by John Blakey; this was improved upon periodically over the next century. Two powerhouses of the late 19th and early 20th century, The Babcock & Wilcox Company and The Stirling Boiler Company, merged in 1907 and rebranded The Babcock & Wilcox H-type boiler to the H-type Stirling — which was capable of producing up to 50,000 pounds of steam per hour.

Boilers began to be constructed in the 1920s and ‘30s with flat studded tube walls and loose tube walls; both of these tube walls increased the heating surface via different means. As industry grew in the 1900s, so too did the need for more complex and powerful boilers — many of which were developed to meet specific requirements. Today, there are several different types of boilers, each of which is suitable for a variety of applications across multiple industries.

Are you looking for boiler service professionals in Australia?

Tomlinson Energy Service are boiler specialists who have been operating since 1892 — delivering high-quality and professional steam boiler services to all industries. We specialise in the sale and maintenance of packaged steam water boilers and stock trusted, world-renowned brands such as Weishaupt and Bosch.

If you would like to enquire about our steam boiler services, then please do not hesitate to contact us today — our knowledgeable and friendly staff are always happy to help.

Tomlinson JTPB 3SDGL sadsad

Tomlinson has successfully installed and commissioned the new and improved SDGL Water tube boiler

Boiler is now fully designed to ASME

The previous design has been modified and enhanced with larger diameter water wall tubes and smaller tube pitch

Counter flow economiser engineered for gases to flow upwards improving the efficiency

Boiler is now fitted with Grundfos VSD pumps , Weishaupt duel fuel burner with VSD and O2 trim, Quality ARI Armaturen flanged valves, Gestra water level and blowdown controls .

Control panel with latest Allen Bradley PLC and HMI

Tomlinson can proudly say this is the highest quality most efficient boiler on the Australian market

Goodman Fielder Moorebank NSW sadsad

Tomlinson Energy Service recently carried out an upgrade of the boiler plant at Goodman Fielder Moorebank.

The task involved the removal of two Old Woodley Boilers built in the 60’s and replacing them with 3 x 500 kw Bosch Unit. It was a full Turnkey Installation which involved replacement of all components in Boiler house including Feedwater Tank and blowdown Tank.

The Bosch unit were CSB fitted with integral Economisers , Weishaupt burners with VSD and O2 Trim and Grundfos Pumps.

The overall nett boiler efficiency is approximately 88%. The entire project was carried out by Tomlinson Installation and Commissioning Team 

Almondco Australia Renmark Boiler Install sadsad

Scope of project is the turnkey supply of equipment, Installation and commissioning of these three boilers, ancillary equipment and 200 meters of stainless steel steam and condensate return lines to the blancing equipment imported from Spain.

Almondco Australia is globally recognised for supplying premium quality almond products since 1944. 

More than 85% of Australia’s almond growers supply to this company – one of the most successful horticultural co-operatives in the nation.